CWAP – Machine State/EAP/4-Way Handshake

This is something that keeps coming up while studying for different certifications and I always have to review everything, flip through the pages since there are technically 3 sections here, I decided to write up a quick overview of all 3 including the flow as shown in the diagram below. When a Wireless Client connects… Continue Reading CWAP – Machine State/EAP/4-Way Handshake

Brocade ICX 6450 PoE Configuration

Recently I configured a Brocade ICX6450 PoE switch on the network and all was working well until my customer hooked up a phone to one of the ports I configured. I was told that the phone won’t power on. Now on a Cisco PoE Switch, I’m used to just simply plugging in phones and getting power. With the Brocade… Continue Reading Brocade ICX 6450 PoE Configuration

Cisco 1142 not joining Cisco 2504 WLC

%PKI-3-CERTIFICATE_INVALID_NOT_YET_VALID Recently I was setting up my lab environment with a Cisco 1142 Access Point and a Cisco 2504 Wireless LAN Controller and I ran into a minor issue. Cisco 1142 Access Point was not joining the WLC. I was getting the following error message when I consoled into the access point. *Jan 1 04:35:10.126:… Continue Reading Cisco 1142 not joining Cisco 2504 WLC

Using SNMPWALK and PortQry tools

SNMPWALK and PortQry tools in Windows We all know that Linux offers some built in tools that are great for troubleshooting purposes, however Windows Operating Systems have limitations. Me being a Windows user primarily (fan of CLI and CLI based tools), I am always looking for different tools. In this post I want to mention… Continue Reading Using SNMPWALK and PortQry tools

Brocade ICX 6450-24P PoE and PoE+

Brocade ICX 6450-24P PoE and PoE+ Limitations and Configuration Recently ran into a minor issue when I was connecting Cisco Meraki MR72’s to a Brocade ICX 6450-24P. Connected 13 Cisco Meraki MR72’s. I was consoled into the switch so I noticed all ports showed getting power but the PoE was denied on port ethernet1/1/24. Looking… Continue Reading Brocade ICX 6450-24P PoE and PoE+

Aerohive – [wifi]: wl1: PHYTX error

[wifi]: wl1: PHYTX error Aerohive Access point Saw following errors in Aerohive AP230. 5 GHz radio won’t serve clients. Reboot or changing channels which resets the wifi1 interfaces fixes the issue temporarily. Looks like the issue may have been resolved in 8.2r5. Will update. 2019-03-22 09:26:29 info kernel: [wifi]: wl1: PHYTX error 2019-03-22 09:26:29 info… Continue Reading Aerohive – [wifi]: wl1: PHYTX error

WordPress SEO