artofrf.com

Ali's Technology Blog

Menu
  • Home
  • Important Links
  • About Me
  • Tools and Scripts
Menu

Cisco Voice Gateway not Re Registering with Cisco Call Manager

Posted on December 18, 2017December 16, 2019 by mali

One of the Cisco router with a PRI lost its registration with the Cisco Call Manager – CUCM. None of the phones were working for outbound dialing however local extension dialing was working. When I logged into the Cisco Router and issued the following command: show ccm. I noticed that it is going back and forth trying to register with the Primary and Backup Cisco Call Manager. I looked at the settings on the Cisco Router and all VoIP related config was right. I tried to do no mgcp and then mgcp still no use. Then I started to run a debug to see what is happening and hopefully debug will give me some indication on the issue. Following commands were issued on the router:

  • debug mgcp events
  • debug mgcp errors
  • term mon

Here is what I saw in the log:

Dec 18 13:42:30.080: S0/SU0/DS1-0/* mgcp_endpt_parent_redirected: parent S0/SU0/DS1-0/*, child S0/SU0/DS1-0/23
Dec 18 13:42:30.080: S0/SU0/DS1-0/23 mgcp_endpt_set_notified_entity:
Dec 18 13:42:30.080: S0/SU0/DS1-0/23 mgcp_endpt_set_notified_entity:ne 10.206.110.20:2427, ne addr 10.206.110.20:2427
Dec 18 13:42:30.080: S0/SU0/DS1-0/23 mgcp_endpt_set_call_agent:
Dec 18 13:42:30.080: S0/SU0/DS1-0/23 mgcp_endpt_redirect_children:
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.080: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=4, conn_mode=3
Dec 18 13:42:30.084: mgcp_is_transient: callp->state=0, conn_mode=0
Dec 18 13:42:30.084: MGCP sys msg: (15)
Dec 18 13:42:30.084: xlate sys msg: (15, 4539B688)
Dec 18 13:42:30.084: sys msg values: (INVALID MGCP EVENT, 0, , 1108831796, CALL_IDLE)
Dec 18 13:42:30.084: process mgcp_handle_cmapp_event
Dec 18 13:42:30.084: mgcp_cmapp_send_rsip: Send-RSIP: Sending gw host is XYZ1-RTR-01.mydomain.com, endpt is *
Dec 18 13:42:30.084: mgcp_cmapp_send_rsip_to_callmgr: Send RSIP – Pass-in: ipaddr=10.206.110.20 ca_port=2427
Dec 18 13:42:30.084: * mgcp_root_get_profile:
Dec 18 13:42:30.084: * mgcp_send_rsip_msg:
Dec 18 13:42:30.084: * mgcp_endpt_record_rsip:
Dec 18 13:42:30.084: * mgcp_send_rsip_msg: Manually recroding RSIP method
Dec 18 13:42:30.084: * mgcp_endpt_record_rsip:
Dec 18 13:42:30.084: * mgcp_enq_retx_rsip_msg
Dec 18 13:42:30.084: mgcp_add_trans_id_rec: Add trans id (689668931, 46CBEB70) record
Dec 18 13:42:30.084: mgcp_stw_timer_start timer type 0, duration 500
Dec 18 13:42:30.652: MGC stat – 10.202.110.36, total=340539, succ=340048, failed=146
Dec 18 13:42:30.652: mgcpapp_process_mgcp_msg :
Dec 18 13:42:30.660: * mgcp_msg_ack
Dec 18 13:42:30.660: MGC stat – 10.202.110.36, total=340539, succ=340049, failed=146
Dec 18 13:42:30.660: * mgcp_check_for_redirection: endpt * was not redirected
Dec 18 13:42:30.660: [S] mgcp_msg_ack:6166,Updating (*)=10.202.110.36
Dec 18 13:42:30.660: * mgcp_msg_ack: Removing msg : RSIP 689668929 *@XYZ1-RTR-01.mydomain.com MGCP 0.1
RM: graceful
Dec 18 13:42:30.664: * mgcp_msg_ack: Setting the restart method to NONE
Dec 18 13:42:30.664: mgcpapp_process_socket
Dec 18 13:42:30.664: MGC stat – 10.206.110.20, total=313, succ=169, failed=143
Dec 18 13:42:30.664: mgcpapp_process_mgcp_msg :
Dec 18 13:42:30.664: * mgcp_msg_ack
Dec 18 13:42:30.664: MGC stat – 10.206.110.20, total=313, succ=169, failed=144
Dec 18 13:42:30.664: * mgcp_check_for_redirection: endpt * was not redirected
Dec 18 13:42:30.664: * mgcp_msg_ack: Removing msg : RSIP 689668931 *@XYZ1-RTR-01.mydomain.com MGCP 0.1
RM: restart
Dec 18 13:42:30.664: * mgcp_msg_ack: Setting the restart method to NONE
Dec 18 13:42:30.664: mgcpapp_process_socket
Dec 18 13:42:30.960: unreachable detected
Dec 18 13:42:30.960: mgcp_cr_and_init_evt_node:$$$ the node pointer 46FA4428

After looking at the debug I noticed that the registration was failing for the host “XYZ1-RTR-01.mydomain.com”. When I looked in the Cisco Call Manager I noticed that the registered name was “XYZ-RTR-01.mydomain.com”. So since the host name of the Cisco Voice Gateway hence it was no longer valid in the Cisco Call Manager. I simply updated the name in Cisco Call Manager and the Cisco Voice Gateway successfully re registered with the Cisco Call Manager – CUCM.

Category: Cisco VoIP, Uncategorized

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Posts

  • Nile Secure Guest – Configuration and Use Case
  • WLAN Pros Toolbox
  • Nile does NAC – Configuring Trust Engine
  • WLAN Validator
  • PCAP I/O Graph Analyzer

Tags

AirDrop arista Arista AGNI Arista CV-CUE Arista NAC Arista WIPS Arista WPA3 UPSK Aruba Central Automating Mist Switch Templates Automation AWDL Configuring Switch Templates in Mist CWAP 403 EAP Format MAC Addresses Hamina Network Planner Juniper SRX300 MacBook Marvis mdns MFD8 MFD9 Mist Access Assurance MistAI Mist Auto Placement Mist MPSK Mist Wireless NaaS Networking Field Day NFD32 NileNav Nile Secure Nile Wi-Fi Social Channels Tech Field Day Troubleshooting with Marvis Troubleshooting with Mist Troubleshooting with Mist AI Troubleshooting with Wireshark Wireless Adjuster Wireless Adjuster Level II Wireless troubleshooting WLPC wlpc2023 Wyebot

Tech Blogs

  • WiFiTodd
  • CCNA Wireless
  • Cisco Full Bars
  • Packet Life
  • Havilandweb
  • Gjermund Raaen
  • Bad-Fi
  • The ASCII Construct
  • Juniper Port Checker
  • WiFrizzy
  • Spectrum Chart
  • BadgerWiFi

Recent Comments

  • Hiten Thakkar on PCAP I/O Graph Analyzer
  • mali on Deploying Nile Secure – My First NSB
  • Larry Farrish on Deploying Nile Secure – My First NSB
  • Courtney on Mist Access Point – CSV
  • ayoub chabrouk on Ubiquiti stealing the show at MFD11

Archives

  • August 2026
  • July 2026
  • March 2026
  • February 2026
  • December 2025
  • November 2025
  • October 2025
  • August 2025
  • May 2025
  • January 2025
  • December 2024
  • November 2024
  • October 2024
  • September 2024
  • August 2024
  • July 2024
  • May 2024
  • April 2024
  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • September 2023
  • August 2023
  • June 2023
  • May 2023
  • April 2023
  • February 2023
  • November 2022
  • October 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021
  • October 2021
  • September 2021
  • August 2021
  • July 2021
  • May 2021
  • April 2021
  • March 2021
  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • April 2019
  • March 2019
  • November 2018
  • October 2018
  • September 2018
  • May 2018
  • January 2018
  • December 2017
  • August 2017
  • January 2017
  • September 2014
  • December 2013
  • October 2013
  • May 2013
  • August 2012
  • July 2012

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

Categories

  • AeroHive
  • Arista
  • Arista
  • Aruba
  • Aruba
  • Aruba Central
  • BYoD
  • Certifications
  • Cisco
  • Cisco
  • Cisco EEM Scripting
  • Cisco Routing
  • Cisco Security
  • Cisco VoIP
  • Cisco VPN
  • Cisco Wireless
  • Conferences and Meetings
  • Design
  • Ekahau
  • General
  • Hamina
  • IoT, IIoT, OT
  • Juniper Security
  • Juniper Switching
  • Juniper/Mist
  • Linux
  • Microsoft
  • Mist
  • Mist Wireless
  • Nile
  • Nile Secure
  • Nile Wi-Fi
  • Programming/Automation
  • Python
  • Ruckus
  • Ruckus Wireless
  • Ruckus/Brocade
  • Ruckus/Brocade Scripting
  • Ruckus/Brocade Switching
  • Secure Guest Service
  • Security
  • Switching
  • Tools
  • Troubleshooting
  • Trust Engine
  • Uncategorized
  • Windows
  • Wireless
  • Wireless
  • WLAN Tools
© 2026 artofrf.com | Powered by Minimalist Blog WordPress Theme